D135
24-Port 10/100/1000 Gigabit Switch
A steel-cased network switch with 24 gigabit ports, used to connect and carry traffic between computers and other hardware.
Technical Specifications
Technical specifications
- Standards
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
- Interface
- 24 × 10/100/1000 Mbps RJ45 ports
- Cable compatibility
- Cat3, 4, 5 (100 m max) / Cat5e and above (100 m max)
- Fan
- None (passively cooled, so it runs completely silent)
- Power supply
- Internal AC 100-240 V, 50/60 Hz
- Power consumption
- 13.62 W maximum
- Heat dissipation
- 46.44 BTU/h
- Switching capacity
- 48 Gbps
- Packet forwarding rate
- 35.7 Mpps
- MAC address table
- 8K entry capacity
- Jumbo Frame
- 10 KB
- Packet buffer memory
- 4.1 Mb
- Transfer method
- Store-and-forward
- Green technology
- Saves 25% to 40% of the power, depending on link state.
- Flow control
- IEEE 802.3x for full duplex, backpressure for half duplex.
- Additional support
- Auto-negotiation and auto MDI/MDIX.
- Advanced modes (on newer hardware revisions)
- Port isolation and loop prevention are both available.
- Dimensions
- 294 mm × 180 mm × 44 mm
- Case type
- Steel body; desktop or rack-mount brackets included in the box.
- Operating temperature
- 0 °C to 40 °C
